On stock Always more than 50.000 linear bearings in brand
The linear bearings
The linear recirculating bearing (Ballbushing) are produce in economic for standard application and for precision application. The ballbushing are composed by a cylindrical outer ring, by a cage that retains the balls, by two end rings to retain the cage and/or, when required, contact seals. All of the components are designed and assembled to optimize the unit performance.the outer ring is suitably hardened to provide the longest possible life expectancy.
The cage made of steel, stainless steel or engineered resin, depending upon the type of bearing selected, provide the retention and allow the proper recirculation of the balls. Ballbushing can be supplied in the following versions :
ON STOCK :
Steel cage
Resin cage
Self-aligning
Compact type
Square flange
Double linear bearing
Stainless steel bearings
Triple-wide linear bearings
The self-aligning linear beraings in NB, Ewellix et FLI
The self-aligning ball bushing is a high-performance bushing with 3 times the load capacity and up to 27 times the life of a conventional ball bushing.
Self-aligning ball bushings can be adapted to many applications such as automated factory equipment, machine tools, industrial machines, electrical equipment, optical and measuring instruments.
=> In metric and inch version in stock
The compact linear bearings in Ewellix & FLI
The compact ball bushings are available in:
– KH Exterior sleeve in pressed sheet metal, and an interior resin cage
– LBBR Outer sleeve and inner cage in resin
– LBBR-HV6 Anti-corrosion version
The visible openings on the outside diameter allow simplified relubrication.
=> In steel and stainless steel version in stock
The slide rotary ballbushing in NB
Slide Rotary Bush features a special retainer fitted into cylindrical steel outer cylinder and is designed to guide steel balls for smooth circulation in its retainer. The retainer is also designed to rotate freely towards radial direction and offers smooth linear and rotary motions.
● Smooth Operation : The inner surface of the outer cylinder allows smooth operation of linear and rotary motions while maintaining a uniform load distribution.
● High Load Capacity : The use of comparatively large diameter steel balls enhances the load capacity.
● Smooth Rotation : The positioning of the steel balls in a cylindrical formation inside the retainer enables a smooth rotational motion regardless of the installation direction.
The self lubricationplain linear bearings in Ewellix and in Pacific bearing
LPAR/LPAT Plain Bushings share the same dimensions as LBCR/LME/KB europeen metric linear ball bushings and LPBR share the same dimensions as LBBR/KH compact linear bearings.
LPAR and LPAT bushings can be fastened and secured in the same way as linear ball bearings, but require additional fixing with circlips. All LPAR variants can be re-lubricated.
LPBR, are made of Polyacetal with specific polyethylene bearing surfaces.
The Pacific self lubricating plain bearings can move in linear, oscillating, rotary, or any combination of motions at speeds exceeding 4 m/s (165 in/s). Designed to handle loads 20 times greater than linear ball bearings, they will not catastrophically fail.
Blue anodized aluminum shell identifies the ISO metric series, which is available in off-the-shelf industry standard sizes and interchangeable with linear ball bearings and some bronze bushings.
- Conforms to ISO tolerance standards, from Ø8 to 80 mm.
- Self Lubricating for oil free operation
- Wide Temperature Range: -240° C/ 204° C (-400° F/ 400° F)
Obtain information via our form: CLICK HERE
Obtenir une information, via notre formulaire :
Un expert prendra en charge votre demande afin de répondre au mieux sur ce produit.
Conformément à l’article 43 de la loi ‘Informatique et Libertés’ relative à l’informatique, aux fichiers et aux libertés, vous disposez d’un droit d’accès, de modification, de rectification et de suppression des données qui vous concernent sur simple demande ecrite à commercial@fli-industrie.fr